yeedi Cube

All-in-one robot vacuum & mop

A Robot for Every Family

yeedi Cube

All-in-1 Vacuum & Mop

$1088
Buy Now On Lazada

Clean

Vacuum: 5100Pa Suction Power

Dustbin Capacity: 360ml

180mins Runtime

Mop: Oscillating Mopping System

Water Tank Capacity: 1000ml

Smart

Anti Drop & Anti-Collision Sensors

Auto Recharge & Resume Cleaning

Voice Control: Amazon Alexa / Google Home Assistant

App: Scheduling, Area Cleaning, Room Cleaning, Virtual Boundary

Smart Mapping

Self-Empty

Auto-empty

Mop Pads Auto-Wash

Mop Pads Auto Hot Air Drying

yeedi k650

Best Pet Vacuum

$249.00
Buy Now On Lazada

Clean

Vacuum: 2000Pa Suction Power

Dustbin Capacity: 400ml

110mins Runtime

Mop: Mopping

Water Tank Capacity: 300ml

Tangle-Free Brush

Smart

Anti Drop & Anti-Collision Sensors

Auto Recharge

Voice Control: Amazon Alexa / Google Home Assistant

yeedi Floor 3 Series

The Ultimate Robot Mop

$619-$899
Buy Now On Lazada

Clean

Vacuum: 5100Pa Suction Power

Dustbin Capacity: 400ml

180mins Runtime

Mop: Dual-Power Spin Mopping

Water Tank Capacity: 200ml

Smart

Anti Drop & Anti-Collision Sensors

Auto Recharge & Resume Cleaning

Voice Control: Amazon Alexa / Google Home Assistant

App: Scheduling, Area Cleaning, Room Cleaning, Virtual Boundary

Auto Carpet Turbo Mode

Smart Mapping

Self-Empty

Station Auto Empty 75-days Dust Free Cleaning

yeedi Vac 2

2-in-1 Vacuum and Mop

$419-$569
Buy Now On Lazada

Clean

Vacuum: 3000Pa Suction Power

Dustbin Capacity: 450ml + 2.5L Dust Bag (Vac2+ Only)

110mins Runtime

Mop: Mopping

Water Tank Capacity: 180ml

Smart

Anti Drop & Anti-Collision Sensors

Auto Recharge & Resume Cleaning

Voice Control: Amazon Alexa / Google Home Assistant

App: Scheduling, Area Cleaning, Room Cleaning, Virtual Boundary

Auto Carpet Turbo Mode

Smart Mapping

Self-Empty

Automatically Empty the Dustbin

Hold Up to 30 Days of Dirt and Debris (Vac 2+ Only)

yeedi vac 2 pro

3D Structured Light Scanning

$599-$749
Buy Now On Lazada

Clean

Vacuum: 3000Pa Suction Power

Dustbin Capacity: 420ml

240mins Runtime

Mop: Oscillating Mopping System

Water Tank Capacity: 180ml

Smart

Carpet Detection

Anti Drop & Anti-Collision Sensors

Auto Recharge & Resume Cleaning

Voice Control: Amazon Alexa / Google Home Assistant

App: Scheduling, Area Cleaning, Room Cleaning, Virtual Boundary

Auto Carpet Turbo Mode

Smart Mapping

Self-Empty

Automatically Empty the Dustbin

Hold Up to 30 Days of Dirt and Debris (Vac 2 Pro+ Only)

The Robot Vacuum Seen in...

The YEEDI Robot Vacuum

Best Sellers

YEEDI CUBE

View all

View all

Meet yeedi
Give A Robot Vacuum A Smart Home

In a world of overpriced robot vacuums that donโ€™t meet your needs, yeedi is here to bring ease and fun into your cleaning routine through advanced robotic vacuum technology. Our robot vacuums are easy to use, smart and efficient so you can just kick back and relax, yeedi will get the job done.

The Big Reviews

โ˜…โ˜…โ˜…โ˜…โ˜…

Theย yeedi K650ย ย is a prime example of solid value as anย affordable robot vacuumย with good debris pickup, especially pet hair.

โ˜…โ˜…โ˜…โ˜…โ˜…

So far, though, the yeedi K650 is the most effective, and the most affordable, of the ones that I've tried.

โ˜…โ˜…โ˜…โ˜…โ˜…

Itโ€™s quite an impressive vacuum.

โ˜…โ˜…โ˜…โ˜…โ˜…

In a sea of indistinct black and gray blobs, the yeedi K700 stands out.

โ˜…โ˜…โ˜…โ˜…โ˜…

The yeedi K650 bowled us over with its ability to pull pet hair off the floor, using the silicone rolling brush.

โ˜…โ˜…โ˜…โ˜…โ˜…

We have 2 dogs and 2 cats and my house has never been cleaner with the vacuum.

Jen Lindsey
โ˜…โ˜…โ˜…โ˜…โ˜…

Bought this for my parents...they love it! It talks to them too! Lol

Victoria

FAQs

yeedi Cube can still perform cleaning with visual navigation system. Running the machine in a completely dark environment is not recommended. Please turn on the ligths.

Yes.
(1) yeedi Cube has a static repositioning function. If the yeedi Cube is moved to the same room, the user can press the AUTO Mode Button and the yeedi Cube will resume cleaning, reducing the probability of missed and repeated cleaning.
(2) If yeedi Cube is cleaning in room A before the mapping is complete and the user moves the yeedi Cube to room C (which is a new environment), the yeedi Cube will locate, detect the new environment and restart mapping. We recommend that during the first initial mapping, the user avoids moving the yeedi Cube manually before the navigation and mapping of the entire area is completed (when ""Area Cleaning"" is displayed, this means the mapping is complete)."

1. The robot was powered off or not switched on or with low battery power.
2. Please check the robot location, it will be โ€œofflineโ€ if not covered by the Wi-Fi network or bad Wi-Fi signal.
3. Wi-Fi router issues like: the Wi-Fi network name/password was changed but you didnโ€™t go through the connection process again. Or after the connection completes, you change some settings of the Wi-Fi router, e.g., to hide Wi-Fi network; or add security setting, e.g., set fixed IP, MAC address filter etc.
4. If you have more than one routers (with different SSID names & passwords) at home,, you have to make the robot connection to each Wi-Fi router one by one; only after that, can the robot move from one area to another area through Wi-Fi network roaming., Do be aware thereโ€™ll be a very short offline period during the roaming process).
5. If you have a Mesh structure (Wi-Fi router extenders), please turn off the extenders and make the connection directly with the Wi-Fi router. After the connection process is successfully completed, you can turn back on the extenders, and then your robot can move to the areas which has network signal covered by the extenders."

No. The camera on the robot is only used for the locating and navigation of the robot. All data is processed locally on the robot and will not be uploaded to the cloud, so it will not violate the user's privacy.

(1) Check whether there is dust on the lens at the top and clean if necessary.
(2) Check whether there are any foreign objects stuck in the Driving Wheels at the bottom and clean if necessary.
(3) Check whether there is dust or grease on the Driving Wheels at the bottom and clean with a dry paper towel if necessary.
(4) Keep the room as well-lit as possible while avoiding exposing it to direct sunlight while the robot is cleaning.
(5) Put away household items placed on the floor and arrange tables, chairs and stools before the robot starts cleaning.
(6) In the first 3-5 cleaning sessions when the initial map is generated, the cleaning route may be chaotic because the robot is exploring the indoor environment and learning more about it. After the map is successfully generated and saved, the cleaning route will be more regular.
(7) If the cleaning route is still chaotic, please reset the map, ensure the robot has been upgraded to the latest firmware (check for new versions in Settings - Firmware Upgrade in the app) and try generating a new map and cleaning again.

(1) If the room's threshold is over 15mm, the robot will not be able to travel over it. Please manually move the robot into the room to clean the room. After the cleaning is complete, move the robot back out of the room and the robot will continue cleaning the other rooms.
(2) If the room's threshold is less than 15mm, please open the door and clear any obstacles on the floor for an unblocked cleaning route.
(3) If the room's threshold is less than 15mm and there is no obstruction, please check whether there is dust/grease on the Driving Wheels at the bottom and clean with a dry paper towel if necessary to improve the robot's obstacle crossing capacity.

(1) If a large area is temporarily left uncleaned, the robot will automatically clean the missed area. There is no need to worry about it. The YEEDI Mop Station's automatic cleaning logic is as follows: Step 1. Clean in back-and-forth pattern; Step 2. Clean the missed area; Step 3. Clean along the edges.
(2) Sometimes the robot enters a cleaned room not because it is going to clean the room again, but because it is attempting to intelligently clean the missed area and the edges.
(3) If the robot is moved or gets stuck, the locating may fail, which will cause repeated or missed cleaning. Therefore, we recommend avoiding manually moving or disturbing the robot during cleaning.
(4) Dark environments and direct sunlight can affect the operation of the robot. Please make sure that sufficient light is available in the room (you may turn on lights) and avoid direct sunlight (you may draw the curtains).
(5) Too many household items on the floor may result in missed cleaning. We recommend that you put away household items that are on the floor so the robot can successfully finish cleaning.
(6) The robot may get stuck due to table, chair or stool legs, and it may deem that the cleaning is complete. We recommend that you arrange tables, chairs and stools before you start cleaning.

Possible Reasons:

(1) There might be dust or dirt on the anti-drop sensor, causing wrong signals. Please clean the sensor with a cotton cloth;
(2) There may be foreign objects stuck in the Driving Wheels, causing the robot to circle on the spot. Please clear any foreign objects from the Driving Wheels;
(3) There might be dust/grease on the Driving Wheels at the bottom, causing the robot to slip. Please clean with a dry paper towel;
(3) The bumper might not be working. Touch the left/middle/right part of the bumper with your hand to see if it bounces back automatically;
(4) If the problem persists after following the steps above, please contact customer service.

(1) Make sure that the door to the room where the Self-Cleaning Station is located is not closed.
(2) Make sure that the Self-Cleaning Station is located in an environment without direct sunlight.
(3) Make sure that the Self-Cleaning Station is placed on a flat, hard floor, without tilting.
(4) Clear any obstacles within 0.5 m on either side and 1.5 m in front of the Self-Cleaning Station. Make sure that the surrounding area of the Self-Cleaning Station is clear of reflective objects (such as mirrors, metal baseboard and glasses).
(5) Make sure that the return sensor at the back of the robot and the infrared sensor of the Self-Cleaning Station are not blocked. Clean with a dry cloth if there are stains.
(6) We recommend that the robot start cleaning from the Self-Cleaning Station. (If the robot is not in the Self-Cleaning Station, please move it to the front of the Self-Cleaning Station, click the ""Recall"" button and begin cleaning after the robot is back in the Self-Cleaning Station.)
(7) Dark environments may affect the operation of the robot. Please keep the room well-lit while the robot is cleaning.
(8) If there is dust/grease on the Driving Wheels, the robot may have difficulty crossing vertical steps and may slip when returning to the Self-Cleaning Station. Please clean the Driving Wheels with a dry cloth before using the robot.

(1) Hard floors such as tiles, hardwood flooring, etc.

(1) The power switch of the robot needs to be turned to ""I"".
(2) Make sure that the Self-Cleaning Station is connected to power supply.
(3) Tap the ""Recall"" button on the right side of the Self-Cleaning Station and wait for the robot to return to the Self-Cleaning Station. Check that the button light on the robot has started to breathe.
(4) It is recommend to use the robot regularly. If the robot cannot charge when not used for a long time, please contact customer service.

Yes. The robot will automatically stop charging when it is fully charged. It will not be overcharged on the Self-Cleaning Station. However, the device must not be operated by children.

(1) While cleaning, the robot may get stuck due to loose cords, trailing curtains or carpet edges. It is suggested to put these items away before cleaning.
(2) Furniture with a height of less than 85mm may block the robot.

Use the Quiet Mode and low water volume to clean up water on the kitchen or bathroom floor. Modes with larger suction power may take in water droplets, which will affect the performance and service life of the fan. It is not recommended to use the robot to clean water-covered floor. For better cleaning results, please drain the water before cleaning.

(1) Please turn off YEEDI Mop Station immediately. Remove the Dust Bin, Filters, Main Brush and allow them to dry completely before reinstalling them.
(2) If the YEEDI Mop Station does not function normally after Youโ€™ve completed these steps, please contact Customer Service.

The YEEDI Mop Station comes with a small cleaning tool (located on top of the Dust Bin at the rear of the robot).
(1) Remove the robot's Side Brush and use the small cleaning tool to clean any hair that may be wrapped around the Side Brush.
(2) Open the cover of the robot's Main Brush with both hands, remove the Main Brush and use the blade of the small cleaning tool to clean any hair that may be tangled around the Main Brush.

The robot is capable of automatically connecting to the power supply after a power outage.
The robot may back out of the Self-Cleaning Station and re-enter to ensure continuous and stable charging when: 1. the electrodes are not fully in contact with the Self-Cleaning Station due to slight vibration; 2. there is insufficient charging voltage due to unstable voltage; 3. the charging signal acquisition has failed due to signal interference.
If the problem persists after ruling out the above possible causes, please contact customer service.

(1) Possible reasons:
โ‘  The robot was not powered on.
โ‘ก The robot was in Do Not Disturb Mode and would not respond.
โ‘ข The robot did not have enough battery power to clean.
โ‘ฃ Schedule settings were not saved. Please follow the instructions to set the timer again.
โ‘ค By default, scheduled tasks will be executed once only. The task will expire after it has been executed. If you want a task to be executed multiple times, please change the execution frequency.
(2) If the problem persists after following the steps above, please contact customer service.

(1) Remove and empty the dust bin.
(2) Check and clean off the main brush (including any hair that may be tangled in the bearings at both ends of the main brush).
(3) Check and clean the side brushes.

(1) If the robot has not been used for a long time, fully charge it on the Self-Cleaning Station. The battery level can be checked in the app.
(2) The battery life will become shorter if Max or Max+ Modes are used. If you want a longer battery life, please use the Standard or Quiet Mode.
(3) The power consumption in the Vacuum and Mopping Mode is higher than that in the Vacuum Mode. If you need to mop for long periods, we recommend that you use the Quiet Mode. (It is not recommended to use the Quiet Mode in the Vacuum Mode, because it may not achieve the premium cleaning performance.)
(4) Cleaning times will become shorter when the battery is near the end of its service life. If the cleaning performance is not satisfying, please replace the battery.
(5) If the problem persists after following the steps above, please contact customer service.